CS7600 Roller Cleaning Plate

The rollers on your CS7600 need cleaning every 1000 cycles. You will need this cleaning plate to carry out this maintenance.

To clean the scanner rollers, follow these steps:

Note: Cleaning the rollers requires using the size 4 insertion slot.

1: If the size 4 insertion slot is not installed, replace the insertion slot with the size 4 insertion slot.

2: Press the scanner’s left function button to access the Settings menu.

3: Select Rollers Cleaning.

4: Press "blue tick" the middle function button to confirm the Rollers Cleaning message. The Rollers Cleaning screen appears.

5: Peel the adhesive protective sheet from the rollers cleaning plate.

6: Insert gently the rollers cleaning plate into the size 4 insertion slot with the adhesive side first and the black stripe facing downwards until the rollers draw the rollers cleaning plate in.

7: Remove the roller cleaning plate from the insertion slot.

Repeat this process with the same cleaning plate 3 times to ensure the rollers are thoroughly cleaned.